Ever wondered how those marijuana seed banks make feminized seeds? Learn how to create your own feminized seeds at home using two female plants! Learn how to feminize seeds at home. Use silver thiosulphate to make your very own cannabis hybrids with your favorite strains for the best results. Feminized seeds have been increasingly rising in demand ever since medical cannabis became legal, but how do we make feminized seeds?
How to Make Feminized Seeds at Home
First of all, what are “feminized” marijuana seeds? Although male and female plants look the same when young, only female cannabis plants make buds. Male cannabis plants grow non-potent pollen sacs instead. Male plants also lower yields and cause seedy buds if they’re left among your female plants for too long. Because male plants don’t make buds and their presence reduces the quality of buds, most growers toss male plants the moment they see pollen sacs forming. However, since about half of regular cannabis seeds end up being male, that means you end up tossing half your plants once they start flowering.
Feminized seeds come from two female plants being bred together, causing all offspring to be female (which means every plant makes buds)
While regular seeds make female plants about half the time, feminized seeds only create female plants. That means you won’t need to toss half the plants once they start flowering. But how are feminized seeds made and can you make them at home?
Feminized seeds are created by breeding two female plants together. Because there are no male parents, all the resulting seeds end up being bud-bearing female plants. With feminized seeds, you can count on every plant to produce buds. Learn more about male vs female plants and feminized cannabis seeds.
Feminized seeds are available from seed banks for nearly every popular or famous strain. Breeders understand that a lot of people just want to grow plants for buds, and don’t care about making a robust breeding program (which is one of the main reasons growers want male plants).
You can’t see the difference between male and female plants until they start flowering (unless you do a genetic test). Feminized seeds ensure all plants are female so you don’t need to worry about it. You know that every plant is female from germination.
So how do seed banks feminize their seeds? How do you breed two female plants together?
The main idea is to force a female plant to produce pollen sacs like a male plant. These flowers (growing on a female plant) create pollen, which can be harvested and used to pollinate another female cannabis plant. The resulting seeds will all end up being female. Can feminizing seeds cause hermaphrodite plants?
Growers can force a female plant to make pollen sacs, and the “feminized” pollen produced can be used to fertilize another female plant. The resulting seeds will only produce female plants.
How do you force a female plant to make pollen?
There are two main ways to make feminized pollen:
- Induce feminized pollen chemically (Recommended) – This is the professional way to feminize seeds and is how reputable seed banks and breeders create feminized seeds to sell to the public. Substances that interact with plant processes such as colloidal silver or gibberellic acid are applied to bud sites of a female plant when they start flowering. Bud sites are drenched daily for the first 3-4 weeks after the switch to 12/12. This causes a female plant to produce pollen sacs which release feminized pollen when they open up. This pollen is used on another female plant to produce feminized seeds. This article will give you step-by-step instructions on how to feminize cannabis seeds using this method.
- Rhodelization (Not Recommended!) – In some cases, a female cannabis plant may naturally start making male pollen sacs or bananas, which can self-pollinate the plant. This happens if the plant is stressed, or if the plant is not harvested in time and buds start to die of old age. The plant is basically doing everything it can to make seeds and save the next generation. This method is “natural” and these seeds end up being mostly female. The problem with this method is you’re selecting for plants that naturally turn into hermies (grow both male and female sex organs) without any chemical induction. This means the resulting seeds are much more likely to turn hermie in natural conditions, too. That’s a problem if you don’t want seedy buds every time you harvest. For that reason, it’s highly recommended you don’t feminize seeds this way. It’s also a good idea to toss any and all seeds that are the result of natural herming (for example seeds you find in your buds even though you didn’t grow any male plants).
Read this article for more in-depth discussion about the pros and cons of each method, and how to avoid hermaphrodite plants when producing your own feminized seeds.
Overview: How to Make Feminized Seeds
This is a quick overview of the process, and then I’ll give the full details and steps below.
1.) Buy or Make Colloidal Silver – The article below will teach you how to make colloidal silver at home, as well as show you where to buy it if you don’t want to make it (it’s actually pretty cheap). It’s basically a solution of silver suspended in water and is available online and in health stores as a dietary supplement.
What about gibberellic acid? From what I understand it can be used exactly the same way as colloidal silver to induce female plants to produce pollen, but I don’t know the recipe for an effective gibberellic acid solution. On the other hand, I know that this exact colloidal silver method works for making feminized seeds. That’s why I’ve only included instructions for colloidal silver. If you’ve used gibberellic acid to make feminized seeds; we’d love to hear from you.
2.) Spray the bud sites of your known female plant daily during the first 3-4 weeks of the flowering stage (until pollen sacs form and start splitting open) – After switching to a 12/12 light schedule to initiate the flowering stage, choose bud sites on your known female plant, and spray/drench them daily with colloidal silver (or gibberellic acid). As the treated flowers develop, they will form into male pollen sacs instead of regular buds. Untreated bud sites on the plant will form into female buds as usual; however, these buds are unsafe to smoke unless you’ve been very careful to make sure they didn’t come into contact with colloidal silver or gibberellic acid during the feminization process as these are unsafe for smoking.
3.) Harvest “Feminized” Pollen – When pollen sacs are ready to be harvested they swell like a balloon and start to open up. Don’t harvest early! Keep spraying the bud sites daily until pollen sacs open or you might end up with empty pollen sacs. When the pollen sacs are ready, the leaf section protecting the pollen will start to crack. At this point, it’s time to collect the feminized pollen. One of the easiest ways to do this is to collect the pollen sacs directly and let them dry for a week. At that point, they can be placed in a bag and shaken to collect all the pollen.
4.) Pollinate Another Female Plant – At this point, take the feminized pollen you’ve collected and use it to pollinate a female plant that has been flowering for about 2-3 weeks (full detailed instructions with a video on how to do this below). Although it’s possible to pollinate the same plant as the original, it’s not recommended in part because the timing doesn’t match up (pollinating buds late in the flowering stage doesn’t produce many seeds). It’s best to pollinate a different female plant that you started budding a few weeks after the original. This increases the number of seeds produced as well as gives the new female plant enough time to develop them to maturity. It also increases genetic diversity compared to self-pollination.
5.) Wait ~6 Weeks After Pollination to Harvest Seeds – After about 6 weeks from pollination, the calyxes on the buds of your female plant will be swollen and fat. You know it’s time to harvest your seeds when they start bursting out. At this point, it’s time to congratulate yourself because you’ve got feminized seeds!
Now that you’ve gotten the overview, here’s the feminization process with detailed step-by-step instructions…
Step-By-Step Instructions (with pics!)
1.) Buy or Make Colloidal Silver (or Gibberellic Acid)
Where to get Colloidal Silver (your options):
Buy Ready-To-Use Colloidal Silver: Colloidal silver is sometimes used as a dietary supplement, so it’s relatively easy to find (never take it without talking to a doctor first though!). If you’re purchasing colloidal silver, try to find a solution that has at least 30 PPM (parts per million) of silver or higher.
- Buy A Colloidal Silver Generator Kit: If you plan on feminizing a lot of seeds, you may want to invest in a generator kit so you can easily make your own endless supply of colloidal silver. This is cheaper in the long run compared to buying it ready-to-use.
- Make Your Own: You can make your own colloidal silver generator at home. The following diagram illustrates what you need to do.
Note: You can purchase gibberellic acid online (a gibberellic acid solution can be used the same way as colloidal silver for feminizing seeds). However, I do not have experience with the gibberellic acid method and don’t know the best way to prepare the solution.
2.) Spray the bud sites of your known female plant daily during the first 3-4 weeks of the flowering stage (until pollen sacs form and start splitting open)
Wait until your plant is 5-6 weeks old before initiating the flowering stage. Some young plants seem to have trouble (and take much longer) to go through the feminization process, and their pollen may not be as fertile, so start with a more mature plant.
When plants are ready, change to a 12/12 light schedule to initiate flower formation and put cannabis plants in the flowering stage. Note: If you’re feminizing an auto-flowering plant, start spraying daily when the plant is about 20 days old from seed. This is when most auto-flowering cannabis strains start making flowers.
As soon as you change the light schedule (and maybe even a day or two before) start spraying your plants thoroughly with colloidal silver at every bud site you want to form into pollen sacs.
Spray bud sites thoroughly, drenching them with colloidal silver every single day. Bud sites are located wherever leaves meet stems.
The above pic shows you where pollen sacs form on the plant (the same places female buds form).
Important! Keep spraying daily until pollen sacs open up. Don’t stop spraying early, even if pollen sacs appear to be already formed, otherwise they may not produce much pollen
A spray bottle / mister is really helpful for spraying bud sites evenly and thoroughly
You can choose to treat a single bud site or all the bud sites on the plant. Any untreated bud sites will develop into female buds as usual. If you want to smoke these buds, it’s incredibly important to avoid letting them come into contact with colloidal silver because silver is not safe to smoke. (Don’t worry, feminized seeds don’t contain any silver). I highly recommend letting the whole plant be your test subject so you don’t have to worry about that
3.) Harvest Your Feminized Pollen
When pollen sacs are starting to crack and look like they’re about to open up (or if you can see one has already opened) then your pollen is ready for harvest!
When pollen sacs are cracking and opening up, you’re ready to harvest your pollen!
Pollen spilling onto a nearby leaf
One way to harvest your pollen is to gently and carefully remove all the pollen sacs. Let them dry in open air for a week, and then put them in a resealable bag. If you shake the bag the pollen should easily spill out. You may need to cut a few open yourself.
How to Store Feminized Pollen: Moisture is your main enemy when storing pollen. It can help to double the mass of the pollen collected by adding regular cooking flour. This absorbs moisture during storage and as an added bonus, it increases the volume to make application easier when you get to pollinating. If pollen is totally dry and you triple-bag the pollen-flour mixture and stick it in the freezer (with a good nametag so you know where the pollen came from), your pollen can be stored for a year or longer. You can add a few silica packs (which suck out any remaining moisture) in the bag to make extra sure that the pollen stays totally dry.
4.) Pollinate Another Female Plant
When your chosen mother is 2-3 weeks into the flowering stage, take a small paintbrush or powder brush and ‘paint’ your feminized pollen on the developing bud sites you want to pollinate. Bud sites (for both male and female plants) are located wherever you can see leaves meet a stem.
Buds are ready to get pollinated when they look like little bunches of white hairs
Only the buds that come in contact with pollen will grow seeds. You can choose to pollinate all of your buds or just a few on the plant.
Here’s a video by Ed Rosenthal on Youtube showing you how to pollinate buds with pollen. Make sure to touch all the female pistils/hairs with your pollen.
5.) Wait About 6 Weeks Then Harvest Seeds
It usually takes about 6 weeks for your feminized seeds to fully develop. Some plants are literally dying right as the seeds become ready, so to get the most viable seeds, you need to try to keep it alive until the seeds actually start dropping. The seeds can be used right away, or stored in a cool, dry place for a few years. Don’t forget to label them with the date.
This seed is about to burst out of its calyx
This is what it looks like when the seed is exposed
Picture Journal of Making Feminized Pollen with Colloidal Silver
This grower initiated the feminization process on a seedling that was only a few weeks old. As a result, the plant wasn’t able to get big enough to produce many pollen sacs. You will get even better results if you start with a plant that is at least 5 weeks old
October 18 – Plant right before the switch to 12/12
October 27 – After being drenched with colloidal silver daily for a little over a week
October 30 – Pollen sacs are forming
November 15 – Pollen sacs appear to be almost fully formed and are swelling in size, but haven’t opened up yet. Don’t stop spraying colloidal silver or you may end up with empty sacs!
November 27 – Pollen sacs are opening up! Collect the pollen before they’re all open!
FAQs – Frequently Asked Questions
How can I identify plant gender before the plant actually starts flowering?
There are a few ways to identify plant gender before the plant actually starts flowering, and each is helpful in different situations.
- Use feminized seeds – All your plants will be female if you start with pre-made feminized seeds.
- Start with a clone – A clone is an exact copy of another plant. If the “mother” of the clone is a female plant, it means the clone is also female
- Look at preflowers (identify plants when they’re 3-6 weeks from seed) – If you know where to look, cannabis plants will actually reveal their gender in the vegetative stage when they’re just 3-6 weeks from seeds. Male plants usually show their gender by 3-6 weeks and female plants usually show their gender around week 4-8 from seed. Learn how to determine the sex in the veg stage by looking at preflowers.
- Test the leaves of your seedling in a lab – It’s possible to send in a leaf from a young cannabis plant to a specialized testing company, and they will be able to determine the gender as soon as 3 weeks from seed! Although I haven’t used any of these companies and can’t recommend any in particular, here’s a link to one example just so you can see what I’m talking about. From talking to other growers who use this method, it appears to be accurate.
- Take a clone and force it to start flowering – if you take a clone from a vegetative plant, you can force that clone to start flowering and reveal its gender. You’ll know the sex of the “parent” plant by the sex expressed by the clone. This is what I do to determine the sex. I cut off a piece of the plant, stick it in a glass of water (don’t forget to label it with the strain), and give it a 12/12 light schedule until the little piece starts forming either pollen sacs or buds.
The easiest way to identify sex with unknown seedlings? Cut off a small branch of the plant, stick it in a cup of water with a label, and keep it in a sunny window on a 12/12 light schedule until buds or pollen sacs start forming. As long as the plant is getting bright light in the day and long dark nights, it will reveal its sex in just a few weeks (you don’t even need to wait for roots to form).
Can I Make a Breeding Program Using Just Female Plants and Feminized Seeds?
Yes, it’s possible to use just female plants and feminized seeds for further breeding, with one major caveat.
Without careful and thorough testing, it may be possible to accidentally select cannabis plants that tend to herm (make male flowers or pollen) and cause seedy buds when you don’t want them to.
For each possible “mother,” clones should be grown in several different environments and tested thoroughly to make sure that the mother plant does not have any tendency to make pollen naturally in normal or stressful conditions. It’s okay if plants grow pollen sacs if induced chemically since that is very unlikely to happen in someone’s garden on accident, but you don’t want plants that will start growing male flowers on their own without chemical induction. Thorough testing of plant hardiness is always important when breeding, but it may be especially important when breeding feminized seeds together.
Are there other reasons I should avoid breeding seeds without males?
The most common reason growers say you shouldn’t do this is because it’s “unnatural” or doesn’t “seem right.” Some growers say you need male plants for genetic diversity. I’ve also heard growers say that the resulting plants will be weaker, sterile, and less potent. Someone once even told me that resulting plants “will be worse in every way.”
As of yet, I haven’t seen any of these claims backed by actual personal experience, or any real-life examples showing why using feminized seeds is not a viable way to breed new strains.
To those who say this type of reproduction just doesn’t seem right, the evolutionary strategy of plants using only female and hermaphrodite plants to breed is actually pretty common and is known as gynodioecy. One example of a plant that only reproduces this way is a flower found in Canada and the US called Lobelia siphilitica, also known as the Great Lobelia. Obviously, this reproduction method isn’t exactly the same as artificial feminization since the pollen production is caused naturally instead of induced chemically, but examples of gynodioecy show that a female flower-based breeding population can exist in the wild even when no plants are purely male.
The Great Lobelia naturally reproduces using only female and hermaphrodite plants. This is similar to the cannabis feminization process because it results in a population of plants that all primarily grow female flowers, with no pure male plants
When it comes to genetic diversity, the ability to cross out to thousands of different cannabis strains allows you to dramatically increase the gene pool without using male plants. So those are my answers to the common objections of a feminized seed-based breeding program, however I am just a theory-crafter when it comes to this topic. It certainly seems possible that a feminized-only breeding program could run into unforeseen problems down the road, but as far as I know there isn’t any evidence of that so far.
Although I have a few anecdotes from growers who have used only feminized seeds for a few generations, it would be much better to share information from someone who has conducted plenty of testing over several generations. We’d love to hear from you if you have bred more than a few generations using only feminized seeds and want to share your experience.
What are the positive aspects of breeding two feminized seeds together?
Besides not having to worry about male plants in the next generation, the main advantage of doing this is you have a much better idea of what you’re working with when it comes to producing the type of buds you’re looking for. When you’re growing a male plant, it has several genes it will pass to its offspring that has to do with how buds develop, but since it’s a male plant those genes aren’t expressed and it’s hard to figure out what they are.
Historically, the way to learn more about the “hidden genes” contained in a male plant is to breed it to several well-known female plants and see how the offspring compare to each other. The genes that don’t come from the known mother plant are assumed to come from the male. Another way of going about this is to take several clones of the same well-known female plant and breed them with many different male plants to see which ones produce the best offspring.
After testing with several pairings, you start to get an idea of the hidden genes a male plant has to offer to its female offspring. This time-consuming process of documenting and identifying good male plants is why proven stud male plants are one of the most valuable and closely guarded types of clones available today.
But the process of finding the right “father” is a little different when you start with two female plants. In this case, you already know quite a bit about the genes of both parents because you can just look at and test the buds of both plants directly. This allows you to pinpoint desirable genes with less guessing and much less time spent growing out and cataloging plants.
Breeding two female plants together offer hints about what kind of buds their genes will produce
Why even have male plants then?
In nature, male plants are effective at increasing genetic diversity by ensuring cross-pollination. With only purely male and purely female plants, every resulting seed will have two different parents.
Another big advantage in the wild of having separate female and male plants is sexual specialization. In other words, plants are able to evolve male and female traits separately, so each type of flower can become more specialized at its unique “job.”
However, this isn’t the only successful breeding strategy for plants. In fact, only 6-7% of plants have completely separate male and female plants like cannabis plants do (known as dioecious plants). Most plants grow some mix of male and female flowers on each plant, with different combinations offering different evolutionary benefits.
You might enjoy this scientific article if you want to learn more about the evolution of sex determination in plants and animals: Sex Determination: Why So Many Ways of Doing It?
And although most cannabis strains (at least the good ones) display either purely male or purely female flowers, there are some wild populations (and some strains of hemp) that regularly produce plants with male and female parts on the same plant.
When it comes to artificial selection for breeding new strains, the grower is in charge of cross-pollination, so there’s no need for the plant to specialize in male parts. Pretty much the only thing most growers care about is how female flowers develop. So (unlike in nature) growers have the freedom to choose plants that improve female buds without even having to consider how it might affect male plants.
Only a small percentage of plant species produce male plants like cannabis.
Can feminizing seeds result in hermaphrodite plants?
The answer is yes. If you do it the wrong way then feminization can lead to plants with an increased chance of herming. However, with a well-tested and well-bred feminization program, one of the main goals is to breed out any plants with hermaphroditic tendencies that show up under normal conditions. When you buy feminized seeds from trustworthy breeders, you can count on the fact that every plant will end up growing only female flowers and that’s it.
This is a relatively big topic with a lot of opposing opinions so I wrote a whole article about it.
Feminizing seeds the wrong way can result in hermaphrodite plants.
Can I pollinate the same plant I collected the pollen from?
Yes, it’s possible. However, it’s not really recommended because, for one, the timing doesn’t match up. By the time your pollen is ready to use, your original plant will already be several weeks past the optimum pollination point. It’s best to pollinate a female plant that has only been flowering about 2-3 weeks, but pollen sacs need more time before pollen is ready to use. It’s also possible to run into unwanted side effects from self-pollination/in-breeding.
One thing to keep in mind is even if you pollinate a plant to itself, the resulting seeds are likely not going to be exact copies of the original (unless the original plant is extremely inbred). The resulting seeds include not just the mother’s expressed genes but also her hidden ones.
How to Feminize Seeds
The cannabis industry has evolved more in the last 15 years than it has in the last century. Society has also evolved, allowing cannabis and the idea of weed to slowly make its way into pop culture, with more and more strains available as well as accessories for smoking or consuming cannabis. Nowadays, pretty much anyone can grow cannabis in their own house with all of the necessary equipment to make their own strains. Years ago only a select few had access to such equipment. Today we’re going to show you how to feminize seeds. You won’t need many items to do so, and the ones you do need are easy enough to get.
Like most living creatures, cannabis plants need a male and a female specimen to reproduce; the male pollinates the female plant which causes seeds to grow. The resulting seeds have genes from both the mother and father plants, so it has a 50% possibility of being female or male. This is why you need to find a way to get your seeds by using just female plants, completely getting rid of male genes, which only leaves the possibility for female seeds.
How to Feminize Seeds | Tutorial
Many growers know that if you stress out cannabis plants, they can easily become hermaphoridtes (a plant with both male and female sex organs) which end up creating male flowers that create pollen which then “impregnates” the plant and others around it. The issue with stress-caused hermaphrodite plants is that most of the resulting seeds tend to be hermaphrodites too, so it’s not the best method to use and it also stresses your plants out quite a lot.
In order to turn a female plant male without stressing it out, all you need is some Silver Thiosulfate, also known as STS. If you apply STS to female plants it will modify their ethylene levels, which is the hormone in charge of determining the sex of certain plants. This causes female plants to change sex and turn into males without the disadvantage of male genes.
Making your own STS only takes about 15 to 20 minutes and you’ll need two ingredients: Sodium Thiosulphate and Silver Nitrate, both of which can easily be found in any pharmacy and on our webstore. Sodium Thiosulfate is a neutral chemical salt that’s used to reduce side-effects in some cancer treatments and can easily be bought without a prescription.
You can acquire silver nitrate on our webstore, although some people prefer to extract it from other products that contain it, such as Argenpal, a product used to get rid of warts – each one of these little contains a very small amount of Silver Nitrate, so it’s probably better just to buy it directly without the need to spend more money or spend forever trying to extract the Silver Nitrate from the product itself. We stock Panreac Silver Nitrate, which may be a bit more expensive but you’re guaranteed the best quality, and it saves quite a lot of time.
How to Feminize Seeds | Making STS
You’ll need protective material such as gloves, safety glasses and a face mask; STS can be quite toxic when inhaled and it can leave large burns on the skin. Make sure you don’t use any metallic objects when making STS – everything should be plastic, as metal can alter the composition and reduce efficiency.
Do not use metal instruments or tools in this process. The first thing you’ll need to do is grab a plastic cup and pour in 20ml of distilled water. Next, depending on your chosen method, get either 7 Argenpal sticks or 0.35g silver nitrate. If working with Argenplal, dilute the tips delicately in the water (the tip is where the silver nitrate is). Grab another plastic cup and add 30ml distilled water and 1.3g of sodium thiosulfate, mixing it slowly until it’s fully dissolved. Then, mix the contents of both glasses and mix slowly again – make sure to use a plastic spoon, no metal.
The result is 50ml of pure Silver Thiosulfate, much too potent to use on your plants, so you’ll need to water it down a bit. Add your Silver Thiosulfate to 400ml of distilled water, so you’ll have around 450ml of STS. Make sure to shake quite a lot until it’s completely mixed. It’s still much too concentrated to apply straight onto your plants; take 100ml of the mixture you just made and add it to 400ml mor of distilled water. You now have 500ml of a usable STS mixture that’s ready to be used on your plants.
For maximum efficiency you’ll need to use it the same day you make it. If stored in a dark, cool space it can last up to 15 days but each day it’ll be a bit less potent. If you have it for over a week and haven’t used it we recommend making another batch if you want the best possible results.
How to Feminize Seeds | How to use STS
STS is used by spraying it on your plants leaves, making sure that it’s entirely covered and dripping. We recommend taking the plant away from your growing area before beginning the process, or the mixture might end up getting on your other plants too. You’ll need to begin applying it 4 or 5 days after flipping the lights, right before your lights go off. This allows you to spray the plant without worrying about the light burning your plants. After 10 days, you need to respray your plants, using the same process, covering the plant in the mixture and letting it soak in in the dark.
The sprayed plant will begin growing male flowers with pollen with can then be used to pollinate whichever plant you want, causing seeds to appear that have absolutely no male genes in them. You can use the pollinated plant in order to make extracts from its resin; the amount of seeds it’ll produce will render it pretty much useless in as far as smokeable flowers. The plant that you’ve applied the STS to will need to be thrown away, as it’s much too toxic to do anything with and if you consume any of it, even its resin, you could run in to some health issues.
When should you polinate your plants?
In order to efficiently pollinate select plants, we recommend having two completely separate grow rooms or areas to work in. One should be for the plants that you’re planning on switching to male in order to obtain female polen; the other should be specifically for the plants that you plan on pollinating once you’ve reverted the other ones.
When using the pollen that you’ve collected from your reverted plants, you need to make sure that the plant that you plan on using it on is fully ready for it; this can depend on the strain you’re growing. The right time to begin applying feminized pollen is actually right when your plants begin to flow real flowers.
You generally want to use the pollen as fresh as possible on a plant that is fully ready to take it on, or else it simply might not work – it’s kind of like people, in that sense. Certain things need to be just right. To harvest large amounts of high quality seeds, you’re probably better off doing a few tests in order to find out when the right moment is. You can do this by testing it out on the same strain before going big.
How to Feminize Seeds | Make your own strains
When making your own seeds you can combine your favorite strains, resulting in a plant that you’ve created yourself that is 100% feminized. When you combine two strains, you’ll get various phenotypes with varying qualities and structures. It’s important that you use regular seeds to do this, as feminized ones are much too weak and might have issues such as stress and end up becoming hermaphrodites.
In order to stabilize the genes in your resulting plants, you’ll need to select the phenotypes you like the most, meaning that you’ll need to grow quite a lot of the seeds that you get from your feminized plant. Then, take a clone from each plant and set them to flower in order to study their characteristics. Once you’re done, you’ll need to pick two mother plants, revert them and cross them with each other to get a more balanced version. This process is repeated as many times as necessary in order to create a balanced strain that has the characteristics you’re looking for.
Feminizing cannabis seeds is quite the process. You need to be able to keep perfect track and control of the timing when it comes to flowering and pollen yield if you want the best possible results. Take your time, do a few controlled tests and then you can start making large amounts of your own seeds.
3 Best Ways to Feminize Cannabis Seeds
Most people are already aware that cannabis buds we use today come only from female plants.
Male plants pollinate female plants, which produce seeds upon pollination.
Just like children, some seeds end up being female and some male. That’s just how nature works.
A male plant can pollinate a whole room of female plants. Even if there were 50 plants in that area, all the male plant requires is a bit of wind, and each female plant will end up being fertilized.
Getting only feminized cannabis seeds is not an impossible task, you just have to work around the rules set up by nature.
Why are seeds feminized?
Cannabis growers need seeds that are guaranteed to grow into female plants, in order to avoid pollination of the entire crop.
No one wants seeds in their weed and because of this issue we require feminized seeds.
When you’re certain that all your seeds are feminized, you can grow big crops knowing that your plants are safe from pollination by a male plant.
Breeders and seed producers also want feminized seeds for business purposes, as they’re in very high demand in places where growing weed is legal.
As cannabis becomes legal in more places throughout the world, feminized seeds are the first small-time thing new growers will start looking for.
Reliably producing female plants is of great value in this industry, because only female plants produce flowers with medicinal value.
How to feminize seeds?
When breeding cannabis, growers will intentionally pollinate their females in order to get certain traits in the offspring.
How to Start Your Own Marijuana Seeds Breeding Program?
However, sometimes the breeder isn’t looking to cross two strains in hopes of getting a specific trait.
Once the breeder stabilizes a certain trait, he’ll look to mass produce the offspring with precisely those traits. He may do so by feminizing seeds that the “mother plant” produces.
In the wild and without any human tampering, cannabis plants produce mostly female seeds when they “perceive” that they’re approaching the end of their lifetime.
Feminization is essentially a process of pushing the plant to produce as many female seeds as possible, by making it “think” that it’s approaching its last days.
In order to survive and spread its genetic material as much as possible, plants will mostly make female seeds, and a very small percentage of male seeds, because a small number of males plants can pollinate a colossal number of female plants.
This is why the process of pressuring the plant to produce female seeds en-masse is called feminization.
There are several ways to perform seed feminization. Each one is different, although they all boil down to the same thing — getting female seeds.
Some methods are more efficient than others, which is why they are preferred by numerous producers and growers.
Feminizing seeds with colloidal silver
Colloidal silver is a substance made from microscopic particles of silver, which are suspended in liquid. Particles of silver are less than 100nm (nanometers) in size, and completely invisible to the naked eye.
You can get bottled colloidal silver on Amazon, or you can make it yourself, which is also relatively simple.
If you’re going to use it only a few times don’t bother making it, just order a couple of bottles.
Colloidal silver works by inhibiting female flowering hormones in cannabis. The result of this is that the male hormones dominate, and thus male flowers are produced.
By doing so, you turn your healthy female plants into males. Afterwards, you use the pollen that came off that plant to pollinate the other plants.
After you pollinate the other female plants, they will produce feminized seeds. This technique is reliant and yields female seeds in huge numbers.
Cannabis is known to yield hundreds (sometimes even thousands) of seeds after being pollinated. The colloidal silver method guarantees that you consistently get feminized seeds.
Here’s how to use it:
Spray colloidal silver on the branches every three days prior to switching the lights to 12/12 and continue spraying it until you start seeing first male flowers.
The more you use it, the more pollen sacks you will get. As the plant matures it will produce pollen that should be collected and used to pollinate other female flowers.
Collect the new seeds and plant them to get the next generation of the same plant.
Feminizing with Gibberellic acid
Feminizing with Gibberellic acid is even easier than with colloidal silver.
Gibberellic acid can also be bought in stores, and it’s mostly available in powder-form.
Gibberellic acid isn’t expensive at all, you can order it online or buy an entire box for as low as $15 bucks.
Mix the gibberellic acid with water so it reaches around 100 ppm (parts per million, the instructions on the packaging will let you know what’s what), and spray that water/acid mix on the plant once a day, for 10 consecutive days during the flowering phase, and male flowers will be produced.
After that apply the pollen from the “gibberellic acid” male flowers on other healthy female plants.
Those plants will yield feminized seeds after being pollinated.
Feminizing with the rodelization method
The rodelization method is by far the slowest, the least efficient, and the least guaranteed to work out of these 3 methods.
Rodelization entails not harvesting flowers after they’ve bloomed, but rather forcing the plant to turn male, in order to preserve itself.
After the plant has flowered, you need to leave it like that for another few weeks. The plant will then stress itself and grow a couple male flowers, in an attempt to pollinate itself once more.
If your plant succeeds, you’ll need to wait an additional few weeks to get decent seeds that are ready for sowing. Keep in mind that this method is not as reliable as the other two, and yields a smaller number of seeds.
This is “nature’s way of feminizing seeds”, although like everything else with nature, it takes a lot of time. A lot more time compared to the gibberellic acid and colloidal silver.
All these factors make rodelization the most natural, but for growers by far the worst possible feminization method.